Design platen buñ dooleel ci digg bi, méngoo ak moules yi soxla doole bu rëy ci digg bi, lu ci melni seau yu peinture.
Vis biñ defaree jëmmal dafay gëna yombal kàttanu plastisifikaasioŋ ak sarse, wàññi diiru liggéey bi. Motëru sarse bu gaaw - dafay yokk gaawaayu sarse bi.
Jëfandikool sistemu motëru servo bu yokk ñaari yoon, buñ miin ak génne ci naaw, ngir gëna mëna liggéey. (Bamu des HMD430M8-SII)
Séddalekatu ndoxu seddal bi am fiis bu gaaw bu 15+1φ12. Jëfandikool ak bande tàngoor infrarouges, effet conservation bu baax ci tàngoor, 30% sakkanal kuuraŋ bu gëna bari bande tàngoor.
Solutions ci seau de peinture
| PARAMETRE | PÀCC | HMD430m8-SII | HMD500m8-SII |
| dayo internasional | -- | 2859/430 | 3165/500 |
| UNIT INJEKSIOŊ | |||
| Volume injection (teori) | cm3 | 1809 | 2042 |
| Diisaayu pikiir bi (PS) | g | 1646 | 1858 |
| oz | 58.1 | 65.6 | |
| Tolluwaayu pikiir | g/s | 591 | 680 |
| Diametru vis | mm | 80 | 85 |
| Pression injection | MPa | 158 | 155 |
| Vis L/D ratio | -- | 22.5:1 | 22.7:1 |
| Vis | mm | 360 | |
| Gaawaayu vis (sans étape) | r/simili | 0-173 | 0-165 |
| UNIT DE PINSE | |||
| Force de serrage | kN | 4300 | 5000 |
| Mould Ouverture stroke | mm | 730 | 810 |
| Dayo plaat | mm×mm | 1032×1042 | 1128×1168 |
| Dist.entre barres de cravate (H×V) | mm×mm | 760×730 | 830×830 |
| Max.leeru bëccëg | mm | 1460 | 1630 |
| Yaatu moule (Min-Max) | mm | 250-730 | 300-820 |
| Ejecteur de traction | mm | 185 | 210 |
| Tonaasu ejektor | kN | 111 | 111 |
| UNIT DE PUISIENCE | |||
| Pression sistem hydraulique | MPa | 17.5 | 17.5 |
| Pomp motëru doole | kW | 72 | 48+31 |
| Nguuru tàngoor | kW | 47.8 | 51.6 |
| Limu zone yiy saytu tàngoor wi | -- | 6 | 6 |
| YENEEN | |||
| Kàttanu reservoir diw | L | 500 | 590 |
| Dimensions masin (L × W × H) | m×m×m | 8.0×2.0×2.6 | 8.3×2.1×2.6 |
| Diisaayu masin bi | Ton | 18 | 22 |
Hot Tags: seau injection moulage machine, Chine seau injection moulage masin defarkat, furnisër, usine
